FIBERMESH | Microsynthetic Fibers
15715
page-template,page-template-full_width,page-template-full_width-php,page,page-id-15715,page-child,parent-pageid-15983,ajax_fade,page_not_loaded,,qode-child-theme-ver-1.0.0,qode-theme-ver-10.0,wpb-js-composer js-comp-ver-4.12,vc_responsive
 

Microsynthetic Fibers

Formulated to address early age cracking problems, Fibermesh® microsynthetic fibers help prevent the propagation of cracks in the plastic state – precisely when most cracks occur. During the plastic settlement phase, the fibers create a three-dimensional support network that resists the downward pull of gravity, thus keeping aggregates in suspension and promoting uniform bleeding. This fiber network increases the tensile strain capacity of concrete during the plastic shrinkage phase as well. In applications where aesthetics are especially important, you can choose a Fibermesh® micro product that provides a virtually invisible finish. With so many proven benefits Fibermesh® remains the world’s most specified concrete reinforcement micro fiber, year after year.

Shotcrete reinforced with Fibermesh® micro fibers have shown to improve freeze-thaw durability, resistance to impact and abrasion, improved cohesion and less rebound.

Fibermesh® 150F micro fiber is the optimized balance of the best type of fiber and the number of fibers for resistance to explosive spalling.  Incorporating a relatively small amount of Fibermesh® 150F fiber provides a 3 dimensional protection system throughout the concrete and ONLY when there is a fire, do they create the correct form of permeability that is required to relieve the steam pressure that is created inside the concrete.

FIBERMESH 150F

FIBERMESH® 150

Fibermesh® 150, e3®, micro-reinforcement system for concrete-100 percent virgin homopolymer polypropylene multifilament fibers with e3® patented technology.
Applications: slabs on ground, paving, shotcrete, precast applications

FIBERMESH 150F

FIBERMESH® 150F

Fibermesh® 150F, micro-reinforcement system for concrete – 100 percent virgin homopolymer polypropylene multifilament fibers.
Applications: concrete which demonstrates a need for a resistance to fire spalling

FIBERMESH_300

FIBERMESH® 300

Fibermesh® 300, e3®, micro-reinforcement system for concrete-100 percent virgin homopolymer polypropylene fibrillated fibers with e3® patented technology.
Applications: residential and commercial slab on grade and pavements

FIBERMESH 500

FIBERCAST® 500

Fibercast® 500, micro-reinforcement system for concrete-100 percent virgin homopolymer polypropylene fibers made specifically for the precast market.
Applications: precast and architectural concrete